Utilizziamo i cookie per personalizzare contenuti ed annunci, per fornire funzionalità dei social media e per analizzare il nostro traffico. Condividiamo inoltre informazioni sul modo in cui utilizza il nostro sito con i nostri partner che si occupano di analisi dei dati web, pubblicità e social media, i quali potrebbero combinarle con altre informazioni che ha fornito loro o che hanno raccolto dal suo utilizzo dei loro servizi
Shutter actuator
Asset Publisher
Shutter actuator
LN4661M2
Flush mounted 2 module actuator with 2 internal relays, 3 pushbuttons and 3 bicolour LEDs, for operation with specific control devices for the management of shutters (UP, DOWN, blade position). However, the same actuator can also be used with all other control devices, although in that case the Preset function will not be available. Preset function: In addition to the Monostable and Bistable UP/DOWN operating modes, by pressing the STOP pushbutton the actuator gives the possibility of moving the shutter to a specific position (Preset). During this mode of operation, the Preset LED will be on. The device is supplied with 9 preset positions, which can be selected by connecting the numeric configurators 1 to 9 to the “Pre” socket on the back of the actuator. It is also possible to set a different position as required by the user; for the configuration modes see the next page. The Preset function can also be managed using the Scenario Module (enabling of scenarios with preset shutter positions). In this case, move the shutter to the desired position when saving the scenario.
Flush mounted 2 module actuator with 2 internal relays, 3 pushbuttons and 3 bicolour LEDs, for operation with specific control devices for the management of shutters (UP, DOWN, blade position). However, the same actuator can also be used with all other control devices, although in that case the Preset function will not be available. Preset function: In addition to the Monostable and Bistable UP/DOWN operating modes, by pressing the STOP pushbutton the actuator gives the possibility of moving the shutter to a specific position (Preset). During this mode of operation, the Preset LED will be on. The device is supplied with 9 preset positions, which can be selected by connecting the numeric configurators 1 to 9 to the “Pre” socket on the back of the actuator. It is also possible to set a different position as required by the user; for the configuration modes see the next page. The Preset function can also be managed using the Scenario Module (enabling of scenarios with preset shutter positions). In this case, move the shutter to the desired position when saving the scenario.