Smarther AC with Netatmo is the connected thermostat for HVAC systems. It can directly manage a single wall unit thanks to the on-board IR emitter, while with the use of the dedicated accessories, it can easily handle more extended systems with several air conditioning units and Fan Coils. The device can be used to manually set the required temperature level, the fan speed and Boost mode, which allows to force the switching on of the system for a limited period of time (15, 30 or 45 minutes) irrespective of the set or programmed temperature. It can also display the temperature and humidity measured in the room. When used in conjunction with the Home + Control App, it allows simple and intuitive temperature programming and management. Thanks to its Wi-Fi connection, Smarther AC with Netatmo can be programmed and controlled remotely. Smarther AC with Netatmo can also be controlled with the Google, Amazon Alexa and Apple HomeKit voice assistants. Smarther AC with Netatmo flush mounted version XW8003/XM8003/XG8003/ 0 490 43/0 490 44. The device is compatible with the Italian (500/503E/502PB), French and British (UA1) standard boxes. Smarther AC with Netatmo wall mounted version XW8003W/0 490 45. It can be installed on the wall, using screws and dowels suitable for the installation surface. You can have up to 10 thermostats in your system. Depending on the type of installation, a single Smarther AC with Netatmo can control (through RF): A)up to 10 connected IR emitter (all with the same communication protocol and located in up to 10 rooms of the Home + Control App). In this case, the Smarther AC on-board IR emitter can be disabled, or it can be used in parallel with the IR emitters for the control of another air conditioning unit. B)up to 5 HVAC actuators, provided that they are all in the same room and that the controlled Fan Coils are all of the same type.